TOP COAT 600
TOP COAT 600
Information
A premium water-based acrylic emulsion interior paint with a smooth, uniform matte finis.
Description
BSCO TopCoat 600 is a premium water-based acrylic emulsion interior paint with a smooth, uniform matte finish. It delivers excellent hiding power, adhesion, and washability for residential, commercial, and public interior environments.Finish: Matt
Fields of Application
✓ Interior final coating for plaster, masonry, concrete
✓ Suitable for stucco, skim coat, cement putty
✓ Applicable on gypsum boards, drywall, wood (with primer)
✓ Ideal for living areas, offices, bedrooms, corridors
✓ For interior walls & ceilings (residential & commercial)
✓ Can be used as undercoat for exterior systems
Advantages
✓ Highest solids (65%) — max film build
✓ Excellent hiding power >98%
✓ High whiteness >90% reflectance
✓ Wet scrub >5,000 cycles and Strong adhesion ≥1.0 N/mm²
✓ Alkali resistant — safe on fresh cement
✓ Fast recoat 3–4 hrs and Water-based, low VOC
Application
Surface Prep
- Substrate must be clean, dry, and sound — moisture content <5%
- Remove dust, grease, and previous loose coatings
- Prime with BSCO Primer for dusty, porous, or gypsum surfaces
- Repair cracks or defects with BSCO Putty 100 or 200
- Cement-based plaster: cure minimum 28 days; mechanically prepare surface
- Coated substrates: remove chalking, lightly sand, wash, allow to dry
Mixing
- Product ready to use stir well before application
- First coat: dilute 10–15% with clean water
- Second coat: dilute 5–10% with clean water
- Avoid over-thinning may affect hiding power and adhesion
Application
- Apply one or two coats using roller, brush, or airless sprayer
- Maintain recoat interval of 3–4 hours at 25°C/50% RH
- Coverage: 6–8 m²/kg per coat (depends on surface absorption)
- Protect freshly painted surfaces from direct sunlight or dust until fully dry
- Do not apply at surface temperatures below +5°C or above +35°C
Cleaning
Clean tools and equipment using clean water immediately after use. Dried material can only be removed mechanically.
