TOP COAT 900
TOP COAT 900
Information
Premium Water-Based Acrylic Paint – Semi-Gloss Finish
Description
BSCO TopCoat 900 is a premium-grade water-based acrylic paint with a refined semi-gloss (½ gloss) finish for interior and exterior applications. It delivers outstanding washability, UV resistance, and a smooth, elegant appearance for luxury and high-traffic areas. Finish: Semi-Gloss (½ Gloss)
Fields of Application
✓ Applied on cement plaster, stucco, concrete, masonry
✓ Suitable for gypsum boards and well-adhered old paints
✓ Ideal for luxury villas, palaces, premium retail, high-end hospitality
✓ For living spaces, hallways, schools, offices, and high-wash areas
✓ Also for external façades, commercial buildings, boundary walls, kitchens, bathrooms
Advantages
✓ Highest gloss 35–50 @60° luxury semi-gloss finish
✓ Wet scrub >10,000 cycles premium washability for kitchens & bathrooms
✓ Washability Class 2+ exceeds standards
✓ Excellent UV, crack, peel, and chalk resistance
✓ Strong adhesion ≥1.0 N/mm² full coverage >98%, low VOC, interior & exterior use
Application
Surface Prep
- Ensure surface is dry, sound, and free of contaminants
- Prime porous or chalky surfaces with BSCO Primer
- Fill cracks and irregularities with BSCO Putty 100/200
- New cement surfaces: cure minimum 28 days
- New cement plaster: smooth with BSCO Putty; apply one coat TopCoat 700 before TC 900
- Coated substrates: remove chalking, sand lightly, wash, apply BSCO Primer, optionally BSCO Putty, then one coat TopCoat 700 before TC 900
Mixing
- Product ready to use stir well before application
- For spray application: dilute with max. 5% clean water if necessary
- Do not over-thin affects gloss level, opacity, and durability
Application
- Apply 2 coats using brush, roller, or airless spray
- Maintain recoat interval of 4–6 hours at 25°C/50% RH
- Coverage: 6–8 m²/kg per coat
- Do not apply under extreme sun, rain, or surface moisture
- Ideal surface temperature: +5°C to +35°C
Cleaning
Clean tools and equipment with clean water immediately after use. Dried residue can only be removed mechanically.
